Buy Now - Pay Later with Affirm
Learn More
\
  See more parts for your Can-Am Defender HD10

STM Powersports Stock Primary Clutch Weights Can-Am X3

$242.00

STM Powersports

Model #3001084

This a a complete adjustable cam arm weight set for the stock primary clutch on the Can-Am X3 and Defender primary clutches

They have the capability adding grams of weight per arm for adjustment. This design allows the option of adding large quantity of weight to two different areas on both sides of the cam arm to create the shifting characteristics you desire. Each arm can be assembled with tungsten and steel washers that can be used in various combinations to achieve the desired operating RPM. Our tungsten washers weigh 7 grams each.

These SUPERTIPS are a drop in piece that requires no modifications to your primary.

These SUPERTIP Cam Arms are not recommended at RPM ranges above 9000 RPM

Our fastener kit included with these arms comes with the following hardware:

Supplied per arm:

  • 2 - tungsten inserts - 7 grams each
  • 18 - washers - 1 gram each
  • 4 - O-rings
  • 12 - M3 x 6 long screws
  • 2 - set screws


  • Supplied per kit:

  • 1 - 222 Loctite - 1ml
  • 1 - T-10 Torx driver
  • Proposition 65

    /!\ warningWARNING: Cancer and Reproductive Harm

    https://www.P65Warnings.ca.gov

    Vehicle Engine Notes
    2016-2017
    Can-Am Defender HD10

    2016-2017
    Can-Am Defender HD8

    2013-2017
    Can-Am Maverick 1000R

    2018
    Can-Am Maverick Trail

    2013-2014
    Can-Am Maverick X

    2016-2019
    Can-Am Maverick X3

    Warranty. Seller warrants solely to Buyer that each product supplied under these Terms will, for 90 days from the date of the original purchase (the "Warranty Period"), conform to Seller's written specifications during normal use and/or operation. Seller's sole and exclusive obligation, and Buyer's sole remedy for failure of any product to conform to the above warranty is, at the option of Seller, repair or replacement of the non-conforming product or a refund of the monies paid by Buyer for the non-conforming product. Buyer must notify Seller in writing during the Warranty Period of any failure by a product to conform to the above warranty. Buyer will pay for shipping of any non-conforming product to Seller and Seller will pay for return shipping to Buyer. Liability under this warranty will be reduced to the extent that: (1) the product is not maintained according to Seller's or the applicable manufacturer's specifications, (2) the product fails, malfunctions, or is damaged as a result of improper handling, improper storage conditions (including, but not limited to, where applicable, temperature and humidity), installation, maintenance, removal, modification or repair, (3) the non-conformity is caused by casualty, abuse, or improper use, (4) the product is altered other than by Seller or with Seller's express written approval, (5) the product is installed, used, or configured other than as contemplated by the parties under the applicable Supply Agreement or at or in a place other than that contemplated by the parties under the applicable Supply Agreement, (6) the product is used, operated, or connected with a third-party good or software not expressly designated by Seller's documentation and specifications for the product, or (7) any failure results from a design or specification supplied by Buyer. Seller does not warrant any electrical components, normal wear and tear, or conditions resulting from misuse, abuse, negligence, accident, improper application, improper installation and/or improper alteration.

    Primary and secondary clutches that are determined to have a defect in material or manufacturing will be replaced at no charge within 90 days of original purchase date. Any racing application is void from warranty. Warranty claims require the return of the product in its original packaging. A $50.00 fee will be charged for inspection. Seller will determine, in its sole discretion, if any claims of failure were due to a defect in material or manufacturing. Warranty of premature wear will be determined by Seller, in its sole discretion. Buyer is responsible for shipping the alleged failed component to Seller and the return for warranty inspection. This warranty does not apply to any vehicle that has been altered in any way to include performance enhancements to the engine other than the original equipment design. Electrical components are not covered under any warranty and cannot be returned once installed or connected to power. Electrical components include but are not limited to: switches, ignition coils, CDI boxes, chips and regulators. Seller reserves the right to make the determination if the part has been subject to normal wear, misuse, abuse, negligence, accident, improper application, improper installation or alteration, and any such determination shall be final.

    All warranty claims will be handled directly by the Seller. To obtain service under this warranty please contact the Seller for return authorization. Cost of removal, reinstallation, product pickup and delivery are the sole responsibility of the original Buyer. Retail customers must provide proof of purchase within 90 days for warranty to be honored. ALL RETURNS FOR WARRANTY MUST BE PRE-APPROVED WITH AN RETURN AUTHORIZATION NUMBER DISPLAYED ON THE BOX. PRODUCT MUST BE RECEIVED WITHIN 10 DAYS OF DATE RETURN AUTHORIZATION IS ISSUED.